Vivotek ND9541P User Manual page 18

VIVOTEK - Built with Reliability
Rack-mounting (Optional, and the slide rails are separately purchased)
IMPORTANT:
If you have either a round-holed or square-holed rack, install cage nuts or clip nuts to the
desired positions on the rack posts.
The instructions below are based on the installation to a 4-post equipment rack.
The slide rails apply to rack cabinet of a depth of 700 to 900mm. With 4 hard drives, the
chassis can weigh up to 7kg.
If you need to install the NVR system into a rack cabinet,
1. Remove the foot pads from underneath the chassis.
2. Unpack the rack-mount rails' package, and detach the inner rails from the rail assembly.
Detach the inner rail by pressing on the release tab.
Release tab
18 - User's Manual
Inner rail
x4