Table of Contents
Advertisement
Chapter Three
Configuation Using the Local Console
The Main Control Portal
3-1. Layout
Move your mouse cursor across the screen to display the portal.
The first functional button is Layout. You can select the 1x1, 1x3, 2x2, 3x3,
4x4, 1+5, 1+12, 1+3, 1+1+3, 1+3+3 layout as the screen display. If you select
the single view layout, the rotation button
button below to let the system swap the display of different cameras by every 10
seconds. The rotation speed is configurable via Settings > System > Display.
Note that the 4x4 and the 1+12 layouts are only available for the ND8422P.
3-2. DI/DO
VIVOTEK - Built with Reliability
Click on the DI/DO button to display the full list of all DI and DO
signals (whether they are connected or not) from all cameras in the
configuration. If a digital input signal is triggered, e.g., the DI-4 on the
left, its indicator will turn solid white.
will appear. Click the rotation
User's Manual - 43
Advertisement
Table of Contents
