How To Begin - Vivotek ND9541P User Manual

VIVOTEK - Built with Reliability

2-1. How to Begin

1. How to access the Configuration Portal?
Make sure a mouse is attached to your NVR. Move your mouse cursor, and the Configuration
Portal will appear on screen. For all the configurable options available through this portal,
please refer to Chapter 3 on page 54.
You can also hide these portal toolbar. Right-click on the LiveView screen to
display the option.
2. How to access the Camera Portal?
Single click to select a view cell, the Camera Portal will appear. The system automatically
detects the characteristics of an individual camera when you select a view cell.
This portal appears with a camera that supports mechanical PTZ.
40 - User's Manual
This portal appears with a camera that does not support mechanical PTZ.
Tips:
Here are some operation steps using the tool bar:
1. Single-click to select a view cell and bring out the tool bar.
2. Double-click to expand a view cell to the full view.
3. Double-click again to shrink the view cell to the original size.