Chapter Six Operation; Liveview; Placing Cameras Into The Layout - Vivotek ND9541P User Manual

VIVOTEK - Built with Reliability

Chapter Six Operation

IMPORTANT:
1. Before operating the NVR, make sure you have properly installed hard drives and configured
the storage volumes. Otherwise, you will not be able to operate most of the system's
functionality.
2. Since the NVR system comes with 32-bit plug-ins for screen control, if your PC runs a default
64-bit IE browser and you manually enter the NVR's address on the browser, your browser
session may malfunction. Instead, if you double-click on the discovered NVR on the IW2
utility, a 32-bit IE browser will open.

6-1. Liveview

6-1-1. Placing Cameras into the Layout

Legends and definitions of icons on the layout panel have been described on page 84.
It is presumed that you have properly inserted all network cameras in your deployment as
previously described on page 84. All 8 cameras should be listed on the Camera list.
Note that layout design can only be performed by the system administrator.
194 - User's Manual
Camera list
Layout
Layout
contents