Table of Contents
Advertisement
iBoot-30A
Troubleshooting
The iB-30 has a recessed pushbutton switch in the event the unit is not performing as expected.
Caution: Be very careful not to touch or contact any of the terminal blocks or AC wiring when
the unit is connected to the AC power source. Use the pushbutton as follows:
Action
Momentary
5 Seconds push
Hold in while and
Power up the iBoot
iBoot-30a_v101118e
Result
Soft Reset. Will not change outlet status.
Reset to Factory Defaults. Hold the button
in until the Outlet LED is blinking, then
release.
Recovery Mode. Allows upload of new
firmware to Factory default IP Address
192.168.1.254
Page 18
Reset button
Advertisement
Table of Contents
Need help?
Do you have a question about the iBoot-30A and is the answer not in the manual?
Questions and answers