User Commands; Event Commands - Dataprobe iBoot-30A Manual

iBoot-30A

USER COMMANDS

set password <user | admin> <old> <new>
<repeat>

EVENT COMMANDS

get events
set time server <dotted decimal>
set time enable <yes | no>
get time
set event <1-8> date<mm/dd/yyyy>
set event <1-8>time<hh:mm>
set event <1-8>repeat<never | hourly | daily
| weekly | monthly | annually>
set event <1-8>action<on | off | cycle |
reboot>
del event <1-8>
PROMPTS
User>
Password>
iBoot >
iBoot Reboot Required>
iBoot-30a_v101118e
These commands are only available to the administrator.
This command is used to set the password of either the
user or administrator.
These commands are only available to the
administrator.
This command displays all scheduled events as shown
below. Example:
Name Date Time Repeats Action
1. Event Name mm/dd/yyyy hh:mm Annually Power On
2. Event Name mm/dd/yyyy hh:mm Annually Power On
3. Event Name mm/dd/yyyy hh:mm Annually Power On
4. Event Name mm/dd/yyyy hh:mm Annually Power On
5. Event Name mm/dd/yyyy hh:mm Annually Power On
6. Event Name mm/dd/yyyy hh:mm Annually Power On
7. Event Name mm/dd/yyyy hh:mm Annually Power On
8. Event Name mm/dd/yyyy hh:mm Annually Power On
This command is used to set the IP Address of a network
time server.
This command enables or disables the use of the time
server and scheduled events.
Displays the current time and time server
Current Time: 16:10:41 01/27/2010
Server: 64.90.182.55
This command is used to set the scheduled action's start
date.
This command is used to set the time the scheduled
action will occur in 24 hour format.
This command is used to set how often the scheduled
action will repeat.
This command is used to set the scheduled action.
This command deletes the scheduled action.
The CLI will use the following prompts:
This prompts the user to enter his user name (user or
admin). This is the first prompt that the user is presented
with.
This prompts the user to enter his password.
This is the prompt that will be displayed after the user has
successfully logged in.
This is the prompt that will be displayed whenever there
have been changes made that require a reboot. This
Page 15
user
admin
0.0.0.0
No