Mitsubishi Electric Melsec WS Series User Manual page 26

MELSEC-WS
Figure 9:
Network module
configuration dialog
Note
23
On the left side of the dialog you will find the area for the Ethernet interface module
IP configuration.
 If desired, enter a Device name for the Ethernet interface module.
 Enter a valid IP address, for the Ethernet interface module, and if required a
valid Subnet mask and a valid IP address for a Default gateway.
Or:
 If your network uses a DHCP server, activate the DHCP checkbox.

If your project is online, you can use the Read button at the upper left corner of
the Ethernet interface module IP configuration area to retrieve the current IP
settings of the Ethernet interface module.

The out-of-the-box default IP address of the Ethernet interface module is
192.168.250.250.
Ethernet interface module