Mitsubishi Electric Melsec WS Series User Manual page 102

MELSEC-WS
Figure 57:
TCP/IP configuration
dialog
Table 33:
TCP/IP configuration
parameters
99
3) Configuring TCP/IP
Configure the communication mode (auto update mode) in the TCP/IP
configuration dialog.
Select Enable auto update and COS and Connect to for socket 1.
(In the sample program, the WS0-GETH is configured as master.)
Option
Enabled
Listen to
Port
Connect to
IP address
Port
Enable COS update/Enable
auto update and COS
Update rate (ms)
Update Dataset 1
Update Dataset 2
Update Dataset 3
Update Dataset 4
To switch the communication mode to the polling mode, activate the Enable COS
update radio button.
4) Editing data sets
Refer to Section 8.2.2 (1).
Procedures before operation
Configuration value
(Listen to)
Checked
Selected
9100 (238C ) (default)
H
Deselected
-
-
Enable auto update and COS
5000 (default)
Checked
Checked
Checked
Unchecked
Configuration value
(Connect to)
Deselected
-
Selected
192.168.250.251
9100 (238C )
H