Applicable System - Mitsubishi Electric Melsec WS Series User Manual

MELSEC-WS
65
Connecting to MELSEC programmable controllers
MELSEC programmable controllers can send data to the MELSEC-WS safety
controller over Ethernet.
The QJ71E71-100 connected to a MELSEC programmable controller or the Built-in
Ethernet port QCPU can send data (e.g. device state or other information of external
devices) to the MELSEC-WS safety controller over Ethernet.
The send data can be used as input data for a function block in the logic editor of
Setting and Monitoring Tool.
Figure 28: Sending data to the MELSEC-WS safety controller

7.2 Applicable system

For configurations of MELSEC programmable controller systems, refer to the
following.

QnUCPU User's Manual (Communication via Built-in Ethernet Port)

Q Corresponding Ethernet Interface Module User's Manual (Basic)