Mitsubishi Electric Melsec WS Series User Manual page 104

MELSEC-WS
Figure 59:
Network parameter -
Open settings
Table 34:
Network parameter -
Open settings
Figure 60:
Network parameter -
Initial settings
101
3) Network parameter – Open settings
Click the Open settings button to open the configuration dialog and
configure the options as follows.
(In the sample program, the QJ71E71-100 is configured as slave.)
Option
Protocol
Open system
Fixed buffer communication
procedure
Pairing open
Existence confirmation
Host station Port No. (hex)
Transmission target device IP
address
Transmission target device
Port No. (hex)
4) Network parameter – Initial settings
Click the Initial settings button to open the configuration dialog and
configure "120" for Destination existence confirmation starting interval.
The QJ71E71-100 can quickly detect a communication stop due to cable
disconnection by configuring a smaller value for this option.
Procedures before operation
Configuration value
(Active)
TCP
Active
No procedure
Disable
Confirm
238C (9100)
H
192.168.250.250
238C (9100)
H
Configuration value
(Unpassive)
Unpassive
238C (9100)
H
-
-