EN
User Guide
SIM Setup
EN
User Guide
Carbon Mobile 5 with printer
SIM Setup
Description
1 Nano SIM Slot
1 micro SAM or 2nd micro SIM Slot
User action
To Install SIM cards please turn off your device, remove the battery cover then
remove the primary battery from the battery compartment but keep the battery
connected.
Insert a SIM card (with contacts face down) by carefully sliding it into the slot until
the card is fully inserted.
Make sure the card orientation is matching with the icon engraved in the housing.
Place the primary battery then place battery cover.
Note: if the device was powered on during insertion. Please reboot the device after
inserting a SIM
Carbon Mobile 5 with printer
4