Installing/Replacing Sim Cards - VeriFone VX 520 3G Installation Manual

T S
ERMINAL ETUP
Installing/ Replacing SIM Cards
NOTE
Installing/
Replacing SIM
Cards
NOTE
22
VX 520 3G I
NSTALLATION
4
Hold the MSAM cardholder panel, grasp firmly and pull upward to expose the
MSAM slots.
Figure 10 Removing VX 520 3G MSAM Cover
5
Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
6
Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Figure 11 Installing an MSAM Card in a VX 520 3G Terminal
Before inserting the MSAM card, position it as shown in
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
7
Close the MSAM cardholder panel, and then replace the terminal rear cover.
The VX 520 3G terminal supports dual SIM (Subscriber Identity Module) feature.
Use the following procedure to replace or install a SIM card.
Always place your primary SIM on the first card slot.
1
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
2
If the battery is inserted, remove the battery. (See
Battery)
G
UIDE
Figure 11, with the card's
Installing/Removing the