Setup
Location
Device
Ease of Use •
Environmental
Factors
CAUTION
This chapter describes the setup procedure for the P630-2 in the following
sections:
•
Device Location
•
PIN Protection Measures
•
Inside the Shipping Carton
•
SAM/TF Cards
•
Power Supply
•
Cable Connections
•
Smart Card Reader
•
Magnetic Stripe Card Reader Use
•
Contactless Transactions
•
Optional Accessories
•
Periodic Inspection
Following are the guidelines used to select an ideal location for the terminal.
Select a location convenient for both merchant and cardholder.
•
Select a flat support surface, such as a countertop or table, or mount it on a
mounting stand supplied by Verifone.
•
Select a location near a power outlet, POS, ECR, or computer connected to
the terminal. Do not string cables or cords across a walkway for safety.
•
Do not use the unit where there is high heat, dust, humidity, moisture, caustic
chemicals, or oils.
•
Keep the unit away from direct sunlight and anything that radiates heat, such
as a stove or a motor.
•
Do not use the terminal outdoors.
The terminal is not waterproof or dustproof. It is intended for indoor use only. Any
damage to the unit from exposure to rain or dust can void any warranty.
C
HAPTER
P630-2 I
G
NSTALLATION
UIDE
2
11