Troubleshooting - SATA SATAjet 1000 A RP Operating Instructions Manual

Notice!
Use of aggressive cleaning
agents can damage the automat-
ic gun.
→ Do not use aggressive cleaning
agents.
Use only suitable cleaning fluids
for cleaning.
→ Use neutral cleaning agent with
pH-value of 6–8.
→ Do not use acids, alkalis,
bases, paint stripper, unsuitable
regenerates or other aggressive
cleaning agents.
Immersing the automatic gun in
the cleaning fluid can cause cor-
rosion. → Do not immerse auto-
matic gun in cleaning fluid.
Improper cleaning tools can dam-
age the bores and have a nega-
tive effect on the spray pattern.
→ Use only SATA cleaning brush-
es.
→ Never use ultra-sonic cleaning
equipment.

12. Troubleshooting

The troubleshooting chart below
lists malfunctions, causes and rem-
edies.
If it is not possible to rectify a
malfunction with the remedies de-
scribed, send the automatic gun in
to the SATA Service Department
(see Chap. 13 for address).
Operating Instructions for SATA Automatic Guns
Malfunc-
tion
Spray jet
uneven
Spritzbild
zu klein,
schräg, ein-
seitig oder
spaltet.
Cause Correc-
tive ac-
Paint nozzle Retighten
not tight- paint noz-
ened suffi- zle.
ciently.
Air distri- Replace air
bution ring distribution
dirty or ring (see
damaged. Chap. 10.2).
Air nozzle Tighten air
loose. nozzle ring
hand tight.
Space Clean in-
between air termediate
and paint space.
nozzle dirty.
Nozzle set Clean noz-
dirty. zle set.
Damaged Replace
nozzle set nozzle set
(see Chap.
10.1).
Spray me- Check spray
dium flow medium
pressure flow pres-
not con- sure.
stant.
Bore in Clean air
air nozzle nozzle (see
clogged Chap. 10.1).
with paint.
Paint nozzle Check paint
tip (paint nozzle tip
nozzle in) for damage.
damaged. If necessary
replace noz-
zle set (see
Chap. 10.1).
US
429