Customer Service And Spare Parts - SATA SATAjet 1000 A RP Operating Instructions Manual

Malfunc- Cause
tion
Round/flat Air distribu-
fan control tion ring not
does not in correct
work. position.
Air distri-
bution ring
damaged.
Round/flat Overwound
fan control control.
cannot be Loose spin-
regulated. dle.
Automatic Soiled
gun does control
not shut air piston seat
off. or worn seal
retainer.
Control air
pressure is
constantly
present.
Corrosion Unsuitable
on air cap cleaning
thread, solution.
material
passage
or nozzle
head.
Operating Instructions SATA Automatic Gun
Correc- Malfunc-
tive ac- tion
Put air Air leaks
distribution from inspec-
ring in cor- tion hole
rect position of material
(see chap- flow control
ter 10.2). or regulat-
ing cap.
Replace air
distribution
ring (see
chapter
10.2).
Remove Material
spindle, un- leaks from
lock and in- behind
stall again. the paint
Replace needle seal
spindle if through the
necessary gun body
(see chap- inspection
ter 10.4). hole.
Clean con-
trol piston
Automatic
seat. Re-
gun
place seal
retainer if
necessary
(see chap-
ter 10.6).
Release
control air
pressure.
Replace
13. Customer service and
nozzle
head. Heed
Customer service department
cleaning
instructions
SATA GmbH & Co. KG
(see chap-
Domertalstraße 20
ter 10.3).
D-70806 Kornwestheim
Automatic gun spare parts
See enclosed Technical Data Sheet
for list of spare parts.
Cause
Defective
seal retain-
er (air side).
Defective
seal or
sleeve.
Defective
paint needle
seal.
Paint nee-
dle clogged
or dam-
aged.
Contam-
ination
between
paint needle
tip and fluid
tip.
Damaged
nozzle set.
spare parts
EN
Correc-
tive ac-
Replace
paint needle
seal re-
tainer (see
chapter
10.3).
Replace
seal or
sleeve (see
chapter
10.5).
Replace
paint needle
seal re-
tainer (see
chapter
10.3).
Replace
nozzle set
(see chap-
ter 10.1).
Clean fluid
tip and paint
needle.
Replace
nozzle set
(see chap-
ter 10.1).
111