Troubleshooting - SATA SATAjet 1000 ROB RP Operating Instructions Manual

Danger!
If the compressed air circuit
and material supply are not dis-
connected before performing
cleaning work, components can
detach and/or material escape
unexpectedly.
→ Always disconnect automatic
gun from compressed air cir-
cuit and material supply before
performing any type of cleaning
work.
Operating Instructions for SATA ROB Automatic Guns
Use of aggressive cleaning
agents can damage the automat-
ic gun.
→ Do not use aggressive cleaning
agents.
Use only suitable cleaning fluids
for cleaning.
→ Use neutral cleaning agent with
pH-value of 6–8.
→ Do not use acids, alkalis,
bases, paint stripper, unsuitable
regenerates or other aggressive
cleaning agents.
Immersing the automatic gun in
the cleaning fluid can cause cor-
rosion.
→ Do not immerse automatic gun
in cleaning fluid.
Improper cleaning tools can dam-
age the bores and have a nega-
tive effect on the spray pattern.
→ Use only SATA cleaning brush-
es.
→ Never use ultra-sonic cleaning
equipment.

12. Troubleshooting

The troubleshooting chart below
lists malfunctions, causes and rem-
edies.
If it is not possible to rectify a
malfunction with the remedies de-
scribed, send the automatic gun in
to the SATA Service Department.
Notice!
US
423