Introduction; Contact Fluke Calibration - Fluke 700HPPK Service Manual

Introduction

The 700HPPK High Pressure Pneumatic Pump and
Manifold Service Kits (the Kit) comes with the necessary
items to service the 700HPPK High Pressure Pneumatic
Test Pump (the Product). For Product usage,
specifications, and basic maintenance information, see
the 700HPPK Instruction Sheet. This document applies to
these Service Kits:
•
Pump Quick Service, SK-700HPP-QS
•
Pump Full Service, SK-700HPP-FS
•
Manifold Service, SK-700HPM-FS
Regular lubrication (typically every 30-days) is the most
important maintenance and ensures trouble-free
operation, and delays having to do Quick-Service and/or
Full-Service. See Lubricate the Product. If pump
operation becomes more difficult or the pump shaft does
not have a thin film of grease on it, this should be done.
Remove the manifold from the pump before you begin
any of these instructions.

Contact Fluke Calibration

To contact Fluke Calibration, call one of the following
telephone numbers:
•
Technical Support USA: 1-877-355-3225
•
Calibration/Repair USA: 1-877-355-3225
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31-40-2675-200
•
Japan: +81-3-6714-3114
•
Singapore: +65-6799-5566
•
China: +86-400-810-3435
•
Brazil: +55-11-3759-7600
•
Anywhere in the world: +1-425-446-6110
To see product information or download manuals and the
latest manual supplements, visit Fluke Calibration's
website at www.flukecal.com.
To register your product, visit
product.
http://flukecal.com/register-
1