Tools Required - Fluke 700HPPK Service Manual

Tools Required

Tools required for the procedures in this document are:
(All tools are metric, equivalent SAE shown where
possible.)
•
2.5 mm hex wrench
•
4 mm hex wrench
•
17 mm wrench
•
20 mm (13/16 in) slim jaw wrench
•
24 mm (15/16 in) wrench
•
25 mm (1 in) slim jaw wrench
•
30 mm (1-3/16 in) wrench
Or use an adjustable wrench and adjustable wrench (slim
jaw)
High Pressure Pneumatic Pump
Tools Required
5