Introduction; Operating Ranges - Fluke P5510 User Manual

Introduction

Operating Ranges

1.800.544.2843
This manual applies to Model P5510.
The Comparison Test Pump is used for checking pressure-measuring instruments against
Master Test Gauges.
The terms "Master Test Gauge" and "Gauge" in this document refer to
any pressure-measuring instrument such as Transfer Standards, Digital
Calibrators and Transducers.
This system is only as accurate as the Master Test Gauge used. The Master Test Gauge
must be regularly calibrated on a Primary Reference Standard (such as a Deadweight
Tester) to ensure accuracy is maintained.
The comparison test pump should be mounted securely to a stable workbench or similar
surface. Four mounting holes are provided in the pump stand for this purpose.
Model P5510 combines the function of both pressure and vacuum pump with a selector
valve that reverses the operating mode of the handpump.
The table below details the mode and maximum working pressure of these instruments.
Table 1. Mode and Maximum Working Pressure
Model
P5510 Pressure & Vacuum
www.calcert.com
15
10 20
5 25
0 30
Note
Mode Max. Working Pressure
300 psi / 20 bar & 90% Vacuum
sales@calcert.com
1