Macintosh Ethertalk Network; Quick Install Steps - Xerox PHASER 5400 Quick Install Manual
Xerox laser printer user manual
Hide thumbs
Also See for PHASER 5400:
- Advanced features and troubleshooting manual (127 pages) ,
- User manual (123 pages) ,
- Service quick reference manual (503 pages)
Table of Contents
Advertisement
Macintosh EtherTalk Network
Quick install steps
1.
Print the Configuration Sheet. Details are in this document in
Appendix A: Print the Configuration Sheet.
2.
Check the Configuration Sheet and verify that the EtherTalk is
enabled, the AppleTalk name is correct, the AppleTalk zone is
correct (if used), and the proper connector is enabled. Details are
in the Advanced Features and Troubleshooting Manual.
3.
Use the software installer to load print drivers. Details for this are
found in your printer's CD-ROM.
4.
Select your printer and zone (if used) in the Chooser.
5.
Send a print job to the printer.
6.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
7.
If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
20
Xerox Phaser 5400 Laser Printer
Advertisement
Table of Contents
