Xerox PHASER 5400 Quick Install Manual page 25

12. You are now presented with a list of zones discovered on the
network. Double-click the Zone Name your printer is on to
expand the list. Now select your printer from the list, and click
OK.
13. You may now capture the AppleTalk Device. With this action,
you prevent others from printing to this device. In most
applications it is best to select No. If you are installing the printer
port on a server that acts as a single print queue for this device,
then click Yes.
14. Insert your printer CD-ROM into your computer's CD-ROM disk
drive and click Have Disk.
15. Click the Browse button and select the directory containing the
Windows 2000 drivers: <CD Drive>:\instal\win2k, and then
click Open.
Select the *.INF file, then click OK.
16.
17. The Wizard returns you to the previous dialog. Verify that the
path and file name are correct, and click OK.
18. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click Next>.
If the printer is not shared, click Next>. To share the printer, enter
19.
a Share Name, check the share checkbox, and then click Next>.
20.
At the next dialog, it is recommended that you print a Test Print.
Click Next>.
The Completing the Add Printer Wizard window appears. If all
21.
the data presented is correct, click the Finish button. If not, click
the <Back button to correct any errors.
22.
Wait for the Test Print to print. A new dialog asks for
confirmation of the Test Print; click Yes.
23. Send a print job to the printer.
24. Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
25. If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
Quick Network Install Guide
19