Chapter 6 Care And Maintenance; Cleaning The Pre-Filter - Surgically Clean Air SCA7000E Operational Manual

Chapter 6
CARE AND MAINTENANCE
WARNING
Cleaning the unit while it is
plugged in may result
electric shock, electric
spark and serious injury.
Unplug the unit before
cleaning or maintenance!
WARNING
• DO NOT clean the
Pre-filter with flammable
substances
• After cleaning the filters,
make sure to dry them
thoroughly before
reinstalling.
To maintain optimum performance of this air purifier, please clean the
unit including the Pre-filter and Electronic cell periodically. When
cleaning the unit, be sure to unplug the power cord, and never handle
the plug with wet hands. If so, electrical shock and bodily injury may
occur as a result.
Main Unit
Wipe with a dry, soft cloth for stubborn stains or dirt. Do not use volatile
fluids, Benzene, paint thinner, polishing powder, this may damage
the surface.Do not use detergents, detergent ingredients may damage
the unit. Keep the unit away from water.

Cleaning the Pre-filter

To assure optimum performance the Pre-filter should be cleaned
regularly.
Cleaning the Pre-filter
Using a vacuum cleaner to remove any dust, clean with water.
•
If it is very dirty, use a soft brush or a neutral cleaner to clean then dry
•
completely before placing it back into the unit.
After cleaning the filters, make sure to dry them thoroughly before
•
reinstalling.
6-1 Open the front panel
• Stop the operation and unplug the
unit.
• Hold the front panel upper portion
(Left and right side) and pull it
toward you.
6-2 Removing the Pre-filter
• Remove the Pre-filter's holder.
• Pull the Pre-filter straight up and
out of the front Panel.
E-17