Remote Control Operation - Surgically Clean Air SCA7000E Operational Manual

Chapter 5
OPERATION
Remote Control
Operation
POWER RESET
SPEED TIMER
UV LMAP NEG.ION
AUTO NIGHT
Pull out the clear
sheet from the battery
cover before using.
+
CR2025 Battery
E-16
The battery is already set in the remote control, pull out the clear sheet
from the battery cover before using.
1
2
4
6
1
Power (ON/OFF) Button
The unit will start operating when the POWER button is pressed.
Pressing the button again will stop operation.
2
SPEED Button
The fan speed can be switched among Low, Medium and High settings.
3
TIMER Button
The set time switches every time the button is pressed as shown
1hr - 2hr - 4hr - Cycle
4
UV LAMP Button
Turns UV lights on and off.
5
NEG.ION Button
Turns Negative Ions on and off.
6
AUTO Button
At Auto mode, the fan speed is automatically switched depending on the
amount of pollution in the air.
7
NIGHT Button
When pressed, all the indicator lights on the display panel will go out
except the Power light on the display panel.
POWER RESET
SPEED TIMER
UV LMAP NEG.ION
AUTO NIGHT
POWER RESET
SPEED TIMER
UV LMAP NEG.ION
AUTO NIGHT
- Cancel.
8
RESET Button
Pressing the reset button 8 times will reset
all the replacement indicator lights.
8
3
5
7
below：