Configuring Docuprint As An Rprinter - Xerox DocuPrint 180 NPS Installation Planning Manual

Configuring DocuPrint as an RPRINTER

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
In the following illustration, the queue, virtual printer, and specified
form are configured with the same name. The user sends a print job
that specifies a print queue named Gazette through the Ethernet or
Token Ring port to the Gazette queue that is served by the print
server. This job is assigned to the Gazette virtual printer on NPS.
Figure D-1. DocuPrint NPS configured as a PSERVER
Client Netware
Workstation File Server
Queue
Device
Print Queue
Ethernet
Gazette
or
(serviced by print server)
Token Ring
The following is a summary of the tasks to perform if you configure
the DocuPrint NPS as an RPRINTER:
•
Novell tasks include the following:
— Sign on to the Novell workstation as a network
administrator.
— From PCONSOLE, create a Printer Queue (for example,
Gazette) and a Print Server (for example, PGazette).
— From the Print Server window, configure a printer for
PSERVER using the Printer Configuration option.
— Type any name (for example, Gazette) for the printer.
Select Remote Other/Unknown type for the printer and
save the information.
— Define the printer in the Queue Service by highlighting the
printer name (for example, Gazette) and pressing Enter.
— Press the Insert key to select the Print Queue (for
example, Gazette) you want to bind with PSERVER (for
example, PGazette).
— Save the information.
•
When configuring NPS, answer the configuration questions as
follows:
— Remote Printer for Novell Netware -- <Y>.
— Use Print Server for Novell Netware -- <Y>.
— Name of Novell Print Server -- PGazette.
— IPX Internal Network Number [000000##] (assigned by
network administrator).
— IPX number of Connected LAN [000000##] (assigned by
network administrator).
— Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP).
DOCUPRINT NPS ON A NOVELL NETWORK
DocuPrint
Virtual
Printer
Gazette
D-9