Printer Components And Options; Printer Components - Xerox DocuPrint 180 NPS Installation Planning Manual

Printer components

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
3. 3Printer components and
The printer processes the electronic data and images received from
the controller and produces the printed report. This chapter
describes the components and options available for the printer.
The standard 96, 4635, and 180 printer components are the printer
control console, the sample tray, the purge tray, the two processor
feeder trays, and the feeder/stacker module(s).
•
4635 and 180: The base configuration for the 4635 and 180
includes an inverter feeder/stacker and one additional feeder/
stacker module.
•
96: The 96 base printer configuration contains only the inverter
feeder/stacker module. An additional feeder/stacker (as
illustrated below) is an option.
Figure 3-1. Printer base components
1 2
7
1 Printer control console
2 Sample tray
3 Attention light
4 Purge tray
5 Feeder/stacker module (optional on 96)
6 Inverter feeder/stacker module
7 Processor feeder trays
The printer provides control buttons and displays for basic printer
functions and status information. The printer control console contains
message and graphic displays that assist you with jam clearance and
printer maintenance. Labels are located throughout the printer to
assist you with a variety of tasks such as clearing a paper jam.
options
3
4
6 5
3-1