Xerox DocuPrint 180 NPS Installation Planning Manual page 148

DOCUPRINT NPS ON A NOVELL NETWORK
D-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
•
After installation, change from PSERVER to RPRINTER as
follows:
— Sign on to privilege as an administrator.
— Type Configure to specify the printer configuration.
— Select Option 3, enter <N> to the Review All Information
question, and type Novell to review Novell information.
— Remote Printer for Novell Netware -- <Y>.
— Use Print Server for Novell Netware -- <N>.
— Name of Novell Print Server -- PGazette.
— IPX Internal Network Number [000000##] (assigned by
network administrator).
— IPX number of Connected LAN [000000##] (assigned by
network administrator).
— Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP).
— Save all of the options.
•
Type Create Virtual Printer Gazette (must be the same name
as the PSERVER printer name).
•
Type Start All.
•
Reboot the NPS.
•
Perform the following tasks from the Novell server console:
— Type Load PSERVER PGazette.
— Make sure the PSERVER window displays and Gazette
activates and is waiting for jobs.
•
Provide all of the required installation parameters identified in
the checklist provided in Chapter 2 of this guide to your service
representative.
In the following illustration, the queue, remote printer, and virtual
printer are configured with the same name, and the specified printer
is set to print duplex. The user sends a print job through the LPT1
port to a queue named DPDuplex that is sent to the DPDuplex, and
assigned to DPDuplex virtual printer.
Figure D-2. DocuPrint NPS configured as an RPRINTER
Client Netware
Workstation File Server
Device Queue
LPT1 Gazette
Netware File Server
RPRINTER configuration
Remote
Printer
Gazette
DocuPrint
Virtual
Printer
Gazette