Printing On Glossy Paper - Xerox COLORQUBE 8570 User Manual

Printing on Glossy Paper

This section includes:
• Glossy Paper Printing Guidelines
• Printing on Glossy Paper from Tray 1
• Printing on Glossy Paper from Tray 2, 3, 4 or 5
Glossy paper can be printed from any tray.
Glossy Paper Printing Guidelines
• Do not open sealed packages of glossy paper until you are ready to load the paper into the
printer.
• Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until
ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you plan to use. Do not leave glossy paper in the tray when
you are finished printing. Reinsert unused glossy paper in the original wrapper and seal it.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam the printer.
Printing on Glossy Paper from Tray 1
1. Open Tray 1 and its extension. For details, see
2. Insert no more than 50 sheets of glossy paper in the tray. Adjust the paper guides to fit the paper.
3. On the printer control panel, if the correct paper size and type are displayed as the current setup,
press the OK button. Go to step 5.
4. If the correct paper size and type are not displayed, do the following:
Select Change setup > OK.
a.
b. At the Tray 1 Paper Size menu, select the paper size and then press OK.
At the Tray 1 Paper Type menu, select Glossy Paper > OK:
c.
5. In the printer driver, select Glossy Paper as the paper type, or Tray 1 as the paper source.
on page 77
on page 77
on page 78
Loading Paper in Tray 1 on page 56.
8X70-075
ColorQube 8570/8870 Color Printer
User Guide
Printing
77