Xerox COLORQUBE 8570 User Manual page 159

3. Verify that the paper is loaded correctly in the tray. Adjust the length and width paper guides:
a. Length guide: Press the sides, then slide the guide until the arrow on the guide points to the
appropriate paper size imprinted on the bottom of the tray. When properly positioned, the
guide clicks into place.
b. Width guides: Slide the width guides until the arrows on the guides point to the appropriate
paper size labeled on the bottom of the tray. When properly positioned, the guides click into
place.
Note: When the paper guides are correctly adjusted, there may be a small space between the
paper and the guides.
8X70-107
8X70-108
ColorQube 8570/8870 Color Printer
User Guide
Troubleshooting
159