Moving And Repacking The Printer; Precautions For Moving The Printer - Xerox COLORQUBE 8570 User Manual

Moving and Repacking the Printer

This section includes:
•

Precautions for Moving the Printer

• Moving the Printer Within the Office
• Preparing the Printer for Shipping
CAUTION: Parts of the printer are hot. To avoid damage to the printer, allow the ink to solidify
and the printhead to cool. To cool the printer quickly, run the Shutdown for Moving Printer
procedure on the printer control panel. The Shutdown for Moving Printer routine requires that you
remove the maintenance kit and waste tray. For details, see
page 139.
Precautions for Moving the Printer
Follow these guidelines to avoid injuring yourself or damaging the printer:
• Keep the printer level. Tilting the printer can cause the ink to spill inside.
• Use the Shutdown for Moving Printer option on the printer control panel for best results. For
details, see Moving the Printer Within the Office
• Always allow the printer to cool before it is moved to avoid ink spills that can damage the printer.
WARNING:
Parts of the printer may be hot. To avoid personal injury, allow 30 minutes for it to
cool down before moving or packing the printer. This allows the ink to solidify and the printhead
to cool.
• Always turn off the printer using the power switch located under I/O door E on the rear right side
of the printer. Unplug all cables and cords. Never turn off the printer by pulling the power cord or
using a power-strip with an on/off switch.
on page 137
on page 138
on page 139
on page 138.
Preparing the Printer for Shipping
ColorQube 8570/8870 Color Printer
User Guide
Maintenance
on
137