Using Manual Feed - Xerox COLORQUBE 8570 User Manual

Printing
4. Adjust the paper guides to fit the paper loaded in the tray.
5. To use the current tray setup, on the printer control panel, press OK.
If you load a new paper size or type in the tray, do the following:
a. On the printer control panel, select Paper Tray Setup > OK.
b. Select Tray 1 Paper > OK.
c. Select Change Setup > OK.
d. Select the paper size and then press OK.
Select the paper type and then press OK.
e.
See also:
Printing on Specialty Media
Using Custom Paper Sizes

Using Manual Feed

Tray 1 can be used as a manual feeder. If you are using paper such as letterhead and do not want
others to use it by mistake, you can set the printer to prompt you when it is time to load the paper for
your print job.
To select manual feed in Windows:
1. In the application you are printing from, open the Print dialog box, select your printer and then
open the printer driver settings.
2. In the Paper/Output tab, click the arrow button to the right of the Paper summary section and
select Select By Tray and then select Manual Feed (Tray 1).
3. In the Manual Feed dialog box that appears, click Yes.
4. Click OK to save the driver settings.
5. Send your print job.
6. When prompted on the printer control panel, remove any paper in Tray 1 and then load the
appropriate media for your job into the tray. The job prints.
58 ColorQube 8570/8870 Color Printer
User Guide
on page 66
on page 81
8X70-126