Printing Model: Workstation To Printer; Overview; Setup - Xerox 701P91273 Installation Manual

9

Printing Model: Workstation to printer.

Overview:

Run the XPrint setup utility to configure your Solaris 1.X / 2.X client to print to a network
connected XPrint printer.
A network connected printer is a XPrint printer that has the Network Interface Card (NIC)
installed and connected to a functioning network.

Setup:

NOTE:
NOTE:
1. Become superuser. Run the 49XX printer setup utility:
2. TYPE: /bin/setup49XX [ENTER]
NOTE:
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
The following instructions assume you have correctly completed the XPrint
PostScript Print Tool installation.
Read the Installation Overview for your variety of UNIX and select how your
XPrint printer will be connected before you perform the following procedures.
49XX is model number for the printer model you are installing. For example, if
you are installing XPrint 4920, then the setup command would be setup4920
9-1