Table of Contents
Advertisement
6. Insert XPrint PostScript Print Tool installation diskette #1 into the floppy drive of your
system.
7. To run XPrint installation script.:
Solaris 1.X USERS:
From a command line, TYPE:
cd /tmp [ENTER]
bar xvfp /dev/rfd0 [ENTER]
XeroxInstall/setup [ENTER]
Solaris 2.X USERS:
From a command line, TYPE:
volcheck [ENTER]
cd /tmp [ENTER]
cp /floppy/floppy0/setup . [ENTER]
./setup [ENTER]
8. Follow setup instructions to install the XPrint PostScript Print Tool.
9. When installation is complete, setup will automatically launch the Setup49XX
configuration tool.
10. Review the Installation Overviews for Solaris and NON Solaris UNIX systems in
Chapter 4 to decide how you wish your XPrint printer connected. The possible
configurations are:
Direct Connect (parallel port)
Network (Remote network printer)
Network (Remote network Spooler)
Network (Configuring a Remote print Spooler)
2-2
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
Advertisement
Table of Contents
