Table of Contents
Advertisement
3
Quick Setup NON SOLARIS UNIX
Overview:
Quick Setup offers the experienced System Administrator a quick route to printer
installation and configuration.
Setup:
1. Verify physical cable connections from your printer to the network. See Network
Interface Guide
2. Assign XPrint printer an IP Address at the control panel. See Appendix B
3. Add your XPrint printer's TCP/IP address and hostname to your NIS database. For
non NIS networks, add the TCP/IP address and hostname to your machine's
/etc/hosts table. Verify IP connectivity with the UNIX "ping" command.
4. TYPE: ping <49XX_hostname> [ENTER]
NOTE: To print, the command MUST return 49XX_hostname is alive. If it does
not, then proceed to the TCP/IP Troubleshooting section of the manual.
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
3-1
Advertisement
Table of Contents
