Loading Paper In Trays 2-5 For 2-Sided Printing - Xerox Phaser 5500 User Manual

Place letterhead (or the top of the page) to enter the printer last.
■
5. If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a. Select Change, then press the OK button.
b. Select the paper size or type, then press the OK button to save your selection.
6. In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source.

Loading Paper in Trays 2-5 for 2-Sided Printing

Use Trays 2-5 for 2-sided printing of all standard paper sizes except postcards, B6 JIS, and
envelopes, and custom paper smaller than 140 mm (5.5 in.) in width or 182 mm (7.16 in.) in
height.
Caution
If you change the type of paper in a tray,
you must change the paper type on the
front panel to match the paper that you
loaded. If you fail to do this, print-
quality problems can occur and the
fuser can be damaged.
Phaser® 5500 Laser Printer
2-21
Basic Printing
5500-140
5500-123