Xerox Phaser 5500 User Manual page 80
Xerox phaser laser printer 5500 user guide
Hide thumbs
Also See for Phaser 5500:
- Service documentation (59 pages) ,
- Maintenance manual (50 pages) ,
- Supplementary manual (9 pages)
Table of Contents
Advertisement
2.
Insert the transparencies (long-edge feed preferred) into Tray 2, 3, 4, or 5.
Note
Do not load paper above the fill line inside the tray.
3.
Adjust the paper guides to the size of the transparencies.
4.
If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select Change, then press the OK button.
b.
Select Transparency, then press the OK button.
c.
Select the paper size, then press the OK button to save your selection.
5.
In the printer driver, select either Transparency as the paper type or the tray you loaded as
the paper source.
Phaser® 5500 Laser Printer
2-48
Transparencies
5500-143
Advertisement
Table of Contents
Troubleshooting
