Xerox Phaser 5500 User Manual page 65
Xerox phaser laser printer 5500 user guide
Hide thumbs
Also See for Phaser 5500:
- Service documentation (59 pages) ,
- Maintenance manual (50 pages) ,
- Supplementary manual (9 pages)
Table of Contents
Advertisement
Printer Driver (Windows)
1.
Select Start, select Settings, and then select Printers.
2.
Right-click the 5500 printer, and then select Printing Preferences.
3.
Select the Output Options tab.
4.
Select the Hole Punching drop-down menu.
5.
Select the desired option.
CentreWare IS
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx)
3.
Click Properties.
4.
Click Printer Defaults in the left navigation tree. Expand General to see Printer
Default.
5.
Select On or Off in the Punch drop-down menu.
6.
Select the desired number of holes in the Punch Holes drop-down menu.
7.
Click the Save Changes button.
To turn hole punching on and off in a supported driver:
■
Windows 98, Windows Me, Windows 2000, Windows XP, Windows Server 2003,
Windows NT PostScript driver:
On the Output Options tab, select On or Off from the Hole Punch drop-down list, then
select Stacker Upper Tray or Stacker Lower Tray from the Paper Destination drop-
down list.
■
Mac OS 9 driver:
In the Print dialog box, select Finishing Options from the drop-down list, then select the
number of holes under Holes To Punch.
■
Mac OS X (version 10.1 and higher) driver:
In the Print dialog box, select Finishing Options from the drop-down list, then select the
number of holes under Hole Punching.
Phaser® 5500 Laser Printer
2-33
Basic Printing
Advertisement
Table of Contents
Troubleshooting
