Xerox Phaser 5500 User Manual page 222

Error or Warning Messages (Continued)
Message
Stapler Is Empty.
Temperature Sensor Failure
Toner Cartridge Failure
Toner Is Low
Tray [2 | 3 | 4 | 5 | 6] Failure
Tray [2 | 3 | 4 | 5 | 6] is missing
Tray [2 | 3 | 4 | 5 | 6] Paper Is Low.
Tray [2 | 3 | 4 | 5] Failure
Tray [2 | 3 | 4 | 5] Paper Guide Does
Not Match Size Menu
Tray 1 (MPT) Paper Guide Does Not
Match Size Menu
Description
Replace the Staple Cartridge. Printing continues without
stapling.
1. Open Door G.
2. Replace Staple Cartridge P/N 008R12941 above R1
area.
3. Close Door G.
An error was detected in the temperature sensor. Print
quality may be degraded.
1. Turn power off, then on.
2. If error continues, call Service.
The Toner Cartridge has failed and it must be replaced.
1. Open the Printer Front Door.
2. Pull out the Toner Cartridge.
3. Replace with P/N 113R00668.
4. Close the Printer Front Door.
The Toner Cartridge is almost empty.
Order replacement P/N 113R00668.
Open And Close Tray [2 | 3| 4 | 5 | 6]. An error was
detected in Tray [2 | 3 | 4 | 5 | 6]. Printing continues using
other input trays.
1. Open and close Tray [2 | 3 | 4 | 5 | 6].
2. If error continues, call Service.
Reinstall the indicated tray.
The indicated tray is nearly empty. Reload the same size
and type of paper soon.
Open And Close Tray [2 | 3 | 4| 5]. An error was detected in
Tray [2 | 3 | 4 | 5]. Printing continues using other input
trays.
1. Open and close Tray [2 | 3 | 4 | 5].
2. If error continues, call Service.
1. Check that the tray's paper guides are against the
paper stack.
2. Set the tray's Change Paper Size menu to the size of
paper in this tray.
1. Check that the Tray 1 (MPT) paper guides are against
the paper stack.
2. Set the tray's Change Paper Size menu to the size of
paper in this tray.
Phaser® 5500 Laser Printer
4-69
Front Panel Messages