Transparencies; Guidelines For Transparencies; Printing Transparencies From Tray 1 (Mpt) Or Tray 6 - Xerox Phaser 5500 User Manual

Transparencies

This topic includes:
■ "Guidelines for Transparencies" on page 2-46
"Printing Transparencies from Tray 1 (MPT) or Tray 6" on page 2-46
■
■ "Printing Transparencies from Trays 2-5" on page 2-47
Transparencies can be printed from any tray. They should be printed on one side only. To order
Xerox Transparencies, contact your local reseller.

Guidelines for Transparencies

■ Remove all paper before loading transparencies in the tray.
■ Do not load transparencies above the fill line; it may cause the printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases
which can cause poor print quality.
Do not use transparencies with stripes on the side.
■
■ Change the paper type at the front panel for all trays.
■ Use Xerox Transparencies; print quality may vary with other transparencies.
For more information on paper types, weights, and sizes, go to
Papers on the User Documentation CD-ROM.

Printing Transparencies from Tray 1 (MPT) or Tray 6

1. Fan the transparencies to release sheets that may stick together.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Phaser® 5500 Laser Printer
Reference/Printing/Supported
5500-170
2-46