Xerox Phaser 5500 User Manual page 85
Xerox phaser laser printer 5500 user guide
Hide thumbs
Also See for Phaser 5500:
- Service documentation (59 pages) ,
- Maintenance manual (50 pages) ,
- Supplementary manual (9 pages)
Table of Contents
Advertisement
Insert Small US postcards short-edge feed and facedown into Tray 1 (MPT) only.
■
Place the top of the postcard toward the rear of the printer.
Envelope Tray
Insert Large US and A6 postcards long-edge feed and faceup into the optional
■
Envelope Tray. Place the top of the postcard toward the left of the tray.
2.
Adjust the paper guides to the size of the postcards.
3.
If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select Change, then press the OK button.
b.
Select
Card
Stock, then press the OK button.
c.
Select the paper size, then press the OK button to save your selection.
4.
In the printer driver, select Card Stock as the paper type or Tray 2 as the paper source.
Phaser® 5500 Laser Printer
2-53
5500-257
5500-278
Postcards
Advertisement
Table of Contents
Troubleshooting
