Infosmart Knowledge Base Documents (English Only) - Xerox Phaser 5500 User Manual

Manually Setting the Printer's IP Address
Note
Ensure that your computer has a properly configured IP address for your network. Contact
your network administrator for more information.
If you are on a network without a DNS server, or in an environment where the network
administrator assigns printer IP addresses, you can use this method to manually set the IP
address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are
in a small office with a single PC and use a dialup modem connection, you can manually set
the IP address.
1. At the printer's front panel, select
2. Select Connection
3. Select Network Setup, then press the OK button.
4. Select TCP/IP Setup, then press the OK button.
5. Select DHCP/BOOTP, then press the OK button to select Off.
6. Select TCP/IP Address, then press the OK button.
7. Enter the printer's IP address, then press the OK button.

infoSMART Knowledge Base Documents (English only)

For more information, go to
documents.
Reference Name
R1002033188
R1015020333
R1015020339
R1015020349
R1015020355
R1015020367
R1002018545
Printer Setup, then press the OK button.
Setup, then press the OK button.
www.xerox.com/office/5500infoSMART
Title
Basic TCP/IP Tutorial and Home Networking Guidelines
Installing the Printer Driver in Windows 9x When Using a USB Connection
Installing the Printer Driver in Windows 2000 When Using a USB
Connection
Installing the Printer Driver in Windows XP When Using a USB Connection
Installing the Printer for a USB Connection in Mac OS 9
Installing the Printer for a USB Connection in Mac OS X 10.3.1 (and later)
Understanding TCP/IP Addressing and Subnetting Basics
Phaser® 5500 Laser Printer
3-8
Connections and Internet Protocol (TCP/IP)
to view these