Xerox Phaser 5500 User Manual page 48
Xerox phaser laser printer 5500 user guide
Hide thumbs
Also See for Phaser 5500:
- Service documentation (59 pages) ,
- Maintenance manual (50 pages) ,
- Supplementary manual (9 pages)
Table of Contents
Advertisement
5.
If necessary, adjust the paper guides to the size of the paper.
Adjust the paper guides according to the paper size and feed direction (long-edge feed or
short-edge feed). Labels inside the paper tray provide additional information for loading
paper according to size and feed direction.
6.
Push the tray completely into the printer.
7.
If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select Change, then press the OK button.
b.
Select the paper size or type, then press the OK button to save your selection.
8.
In the printer driver, select either the paper type or the tray you loaded as the paper source.
Note
For information on custom size printing, go to
the User Documentation CD-ROM.
5500-132
Reference/Printing/Custom Sizes
Phaser® 5500 Laser Printer
2-16
Basic Printing
5500-032
on
Advertisement
Table of Contents
Troubleshooting
