Error or Warning Messages (Continued)
Message
Tray 4-5 Logic Board Failure
Tray 4-5 Logic Board Failure
Tray 6 Logic Board Failure
Tray 6 Logic Board Failure
Wrong Paper Size
Load Tray [1 (MPT) | 2 | 3 | 4 | 5 | 6]
with [size*] [type*]
Wrong Paper Type
Load Tray [1 (MPT) | 2 | 3 | 4 | 5 | 6]
with [size*] [type*]
Description
An error was detected from the Tray 4-5 Unit Logic Board
NVRAM memory. Printing continues using other input
trays.
1.
Turn power off, then on.
2.
If error continues, call Service.
An error was detected in the Tray 4-5 Logic Board
communication. Printing continues using other input trays.
1.
Turn power off.
2.
Verify Tray 4-5 wire harness is properly connected by
unplugging and reconnecting.
3.
Turn power on.
4.
If error continues, call Service.
An error was detected in the Tray 6 Logic Board
communication. Printing continues using other input trays.
1.
Turn power off.
2.
Verify Tray 6 wire harness is properly connected by
unplugging and reconnecting.
3.
Turn power on.
4.
If error continues, call Service.
An error was detected from the Tray 6 Logic Board
NVRAM memory.
1.
Turn power off, then on.
2.
If error continues, call Service.
Replace the paper in the indicated tray with paper of the
indicated size and type.
Replace the paper in the indicated tray with paper of the
indicated size and type.
Phaser® 5500 Laser Printer
4-70
Front Panel Messages