General Safety Overview - UNI-T UTD2000 Series User Manual

General Safety Overview

This instrument strictly complies with the safety requirements for electronic
measuring instrument GB4793 and IEC 61010-1 safety standard during design and
manufacturing. Please understand the following safety preventative measures, to avoid
personal injury, and to prevent damage to the product or any connected products. To
avoid possible dangers, be sure to use this product in accordance with the regulations.
Only trained personnel can perform the maintenance program.
Use the correct power line: Only use the dedicated UNI-T power supply appointed to
the local region or country for this product.
Correct Plug: Don't plug when the probe or test wire is connected to the voltage
source.。
Ground the product: This product is grounded through the power supply ground wire.
To avoid electric shock, grounding conductors must be connected to the ground.
Please be sure that the product is properly grounded before connecting to the input or
output of the product.
Correct connection of oscilloscope probe: Ensure that the probe ground and ground
potential are correctly connected. Do not connect ground wire to high voltage.
Check all terminal ratings: To avoid fire and the large current charge, please check all
the ratings and the marks on the product. Please also refer to the product manual for
details on the ratings before connecting to the product.
Do not open the case cover or front panel during operation。
Only use fuses with ratings listed in the technical index
Avoid circuit exposure: Do not touch exposed connectors and components after
power is connected.
Do not operate the product if you suspect it is faulty, and please contact UNI-T
authorized service personnel for inspection. Any maintenance, adjustment, or
replacement of parts must be performed by UNI-T authorized maintenance
personnel.
Maintain proper ventilation
Please do not operate the product in humid conditions
Please do not operate in inflammable and explosive environment
Please keep the product surface clean and dr
UTD2000 Series User Manual
4