Sub-Zero Wolf BI Series Service Manual page 36

Electronic Control
LIGHTS ICE MAKER MAX ICE
Figure 2-58. Service Icon Flashing, but Alarm Not Chiming (Usually with Normal Temperatures Displayed) =
Major Fault Code Logged (Threatening Temp. Problems), and/or Fault Codes not Cleared after Viewing
LIGHTS ICE MAKER MAX ICE
Figure 2-59. Service Icon Flashing with Alarm Chiming = Major Fault Code Logged (Immediate Action
Required; Temperature Problems and/or Possible Appliance Damage &/or Flood Warning - Water through
Indicates Cleared Fault Codes
LIGHTS ICE MAKER MAX ICE
Figure 2-60. To Clear Fault Codes After Correcting the Problem, Touch ALARM Key for 15 Seconds -
"C" and "FC" appear for 5 Seconds indicating Fault Codes have been Cleared
7040317 - Revision A - September, 2015
Built-In (BI) Series
Built-In (BI) Series
COLDER WARMER
COLDER WARMER
Flow Meter but No Call for Water)
COLDER WARMER
(SWS #4380000)
(SWS #4380000)
COLDER WARMER
COLDER WARMER
COLDER WARMER
Touch and hold for 15 seconds
2-36
PURE AIR ALARM POWER
PURE AIR ALARM POWER
PURE AIR ALARM POWER