6F. Set Code Pad Number And Area; Code Pad Functions - GE NetworX Series Installation And Setup Manual

6f. Set Code Pad Number and Area

Action
[program code]
[code pad number]
[area number]

7. Code Pad Functions

7a. Reading the Event Log
The control panel has an event log that can be retrieved using a master code. This log contains a listing
of the last 185 events along with date, time, and area where the event occurred.
Action
[master code]
The display contains the following information.
Event
Date
(month/day)
This screen shows an opening of area 3 on September 25
this event is not programmed to be reported to the central monitoring station.
NX-148E LCD Code Pad Installation and Setup Manual
Prompts to 'Please Enter Your Code'.
Prompts for the code pad number.
The current code pad number will be
displayed in the lower right hand corner.
Prompts for the area number.
The current area will be displayed in the lower
right hand corner.
Automatically exits this mode.
Prompts to 'Please Enter Your Code'.
Shows the most recent event.
Views the events from newest to oldest.
Views the events from oldest to newest.
Open
9/25 17:57
Time shown in
24-hour format
Result
Result
75
P3
p indicates area number
reported
th
at 5:27 p.m. by user 75. The
User or zone ID
indicates an event not
shows that
11