Real-Time Clock; To Remove The Internal Battery; To Set The Real-Time Clock - GE IC754VSI06SKD User Manual

T o re m ove t he i nt e rn a l b a t t e ry
T o se t t h e re a l -t i m e cloc k
GFK-2357A
1. Disconnect AC power from the 24VDC supply.
2. Open the rear access panel.
3. Release the battery by gently lifting it from the completely exposed side, past the small protrusions. To avoid
breaking the battery retainer clips, do not apply excessive upward pressure.
4. Slide the battery out of its carrier, noting the arrow on the carrier indicating the direction of removal.
R e a l - t i m e C l o c k
The QuickPanel View Keypad has a programmable real-time clock capable of
reporting the current time in Year/Month/Day/Hour/Minute/Second. The time is set
from the Windows CE interface and retained through a power cycle if battery
backup is available. Daylight saving time is enabled by a check box within the
dialog box. The time can be displayed in the system tray on the task bar.
1. In the Control Panel, double-tap
The Date/Time Properties dialog box appears.
Note: Tap Apply after making changes in any box.
2. To modify the date, select the Date/Time tab.
3. Tap the year to choose a new year; tap the month to choose a new month.
4. Tap a date to specify the day of month.
5. From the Time Zone box, choose your zone.
6. Select Auto Adjust DST to have the clock automatically compensate for daylight savings time.
7. In the Current Time box, adjust the hours, minutes and seconds.
8. Tap OK to finish.
Date/Time.
6" QuickPanel View Keypad
D e t a i l e d O p e r a t i o n
Other Subsystems
57