Preparing For Operation; Initial Inspection; Power Supply Requirements - HP E5970A User Manual

Preparing for Operation
This section covers the information you need to know to set up your
instrument.
Initial Inspection
Inspect the shipping container for damage. If there is damage to the container
or cushioning, keep them until you have checked the contents of the shipment
for completeness and verified the instrument both mechanically and electrically.
The Appendix
D
gives a procedure for checking the operation of the instrument.
If the contents are incomplete, mechanical damage or defect is apparent,
or if an instrument does not pass the operat,or's checks, notify the nearest
Hewlett-Packard office.
Power Supply Requirements
The instrument is powered by t,wo 1.5V dry batteries (Mignon AA size), for an
operating period of approximately 36 hours, or two
1.2V
rechargeable batteries
for an operating period of approximately 12 hours.
When the batteries are low, the low-battery indicator is shown on the display.
At this stage, there is approximately enough charge for another 30 minutes of
use.
Preparing for Operation A - I