Adjusting The Backlight And The Automatic Sleep Time; Setting The Screensaver; Managing The Directory; Managing Local Directory - Yealink VP59 User Manual

Adjusting the Backlight and the Automatic Sleep Time

You can adjust the backlight brightness at any time. The backlight brightness is adjusted automatically if
you do not use the phone for a specific time.
About this task
The settings are as below:
• Backlight Brightness: The backlight brightness when you are using the phone.
• Automatic Sleep Time: The phone will automatically adjust the backlight brightness when you are not
using the phone for a specific time. The time can be 1, 2, 5, 10, or 30 minute (s). When the phone has
been idle for the time you set, the backlight goes out or becomes dim.
Procedure
1. Tap Setting > Basic > Backlight.
2. Drag the backlight slider.
3. Select the desired value.
4. Save the change.

Setting the Screensaver

If the phone has been idle for a specific time, it will automatically go to the screensaver mode. You can
touch the screen or press any key to exit the screensaver mode. If the phone has been idle for a specific
time again, it will automatically go to the screensaver mode again. You can customize the screensaver
time.
Procedure
1. Tap Setting > Basic > Screensaver.
2. Select the desired time.
3. Save the change.

Managing the Directory

Several types of directories are available on your VP59.
•

Managing Local Directory

• Managing Local Favorites
• Yealink Cloud Contacts
• YMS Contacts(Enterprise Directory)
• Searching for Contacts
Managing Local Directory
• Adding a Local Contact
• Editing Local Contacts
• Deleting Contacts
| Managing the Directory | 43