Temperature; Claris Filter; Energy Safe Mode, Esm; Automatic Switch Off Time - Jura ENA Micro 1 Series Technical Information

Elektroapparate AG
Language
14.3

Temperature:

Fix HIGH

Draw off temperature is measured at the outlet and is, depending on settings, between

82 °C ... 89 °C (179 °F ... 192 °F)
In the range of < 80 ml, an intelligent heating system comes to action which is able to remember

the time of the last product taken. Therefore, at the beginning of a draw off it will heat up slightly
higher in temperature to compensate the loss.
15

CLARIS filter:

Activate Filter by touching (

Filter symbol (
16

Energy Safe Mode, ESM:

Fix enabled

Thermoblock switches off after 5 minutes, after the last draw off (~4.0 Wh)

pictograms lights less bright
Stand-by power:

17

Automatic switch off time:

Fix 2 hours

18

Automatic Rinses:

Switch on/off rinses is always enabled

19

Empty system completely (frost protection):

1. Precondition: Your ENA is ready for use
2. Touch the NORMAL
3. Remove and empty the water tank
4. Touch the symbol ESPRESSO
5. Hot water will continue to flow until the system is empty and symbol WATER TANK
6. Press the On/Off button to switch the machine off
Author: Patrik Studer
Date: Rev. A:
09.05.2012 19.09.2012
Technical information
EN
&
) for approximately 2 seconds
0W
& STRONG
Checked:
Rev. B: Rev. C:
ENA Micro 1
) for approximately 2 seconds and then
symbols for approximately 2 seconds
Approved: Docu.-name:
L:\Geräte\ENA_Micro\ENA_Micro_1\Schulungsunterlagen\E\
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. D: Rev. E:
Technical Support
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. F:
Page 8/10
lights up