Service Connector, 1 St Generation; Key Combinations; Reset To "First Use" (Fill System, Initializing); Reset To Factory Settings - Jura ENA Micro 1 Series Technical Information

Elektroapparate AG
Language
1.2 Service connector, 1
Push with a small screw driver (No. 0) into both slots, between side- and front panel, to release the

interlock and pull top cover up to remove it
Support by pushing with finger from above

2

Key combinations:

2.1

Reset to "first use" (Fill system, Initializing):

Precondition: Your ENA is ready for use

Touch the NORMAL

Remove and empty the water tank

Touch the symbol ESPRESSO

Hot water will continue to flow until the system is empty and symbol WATER TANK

Remove drip tray and coffee grounds container

Open cover for powder chute for ground coffee

Touch the symbol ESPRESSO

All symbols lights up 3 times

Appliance switches off automatically

2.2

Reset to factory settings:

Precondition: Your ENA is ready for use

Touch the NORMAL

Remove and empty the water tank

Touch the symbol COFFEE

All symbols lights up 3 times

Appliance switches off automatically

Author: Patrik Studer
Date: Rev. A:
09.05.2012 19.09.2012
Technical information
EN
st
generation:
& STRONG
& STRONG
Checked:
Rev. B: Rev. C:
ENA Micro 1
Service connector
symbols for approximately 2 seconds
symbols for approximately 2 seconds
Approved: Docu.-name:
L:\Geräte\ENA_Micro\ENA_Micro_1\Schulungsunterlagen\E\
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. D: Rev. E:
Technical Support
Interlock Verriegelung
lights up
Technische_Informationen_ENA_Micro_1_EN.doc
Rev. F:
Page 4/10